Product Category
Series chemical process pump
Product Code
SLZA
Product Overview
This series of pumps are horizontal, single-stage centrifugal pumps and rear-pull design, which meet the national standards of ANSI/API610-2004 tenth edition and GB/T3215-2007 centrifugal pumps for petroleum, heavy chemicals and natural gas industries. SLZA series chemical pumps are horizontal, single-stage and single-suction cantilever centrifugal pumps. The product is designed according to API610 standard, belonging to OH1 structure, and the design pressure is 2.5MPa. Suitable for conveying clean or granular, neutral or corrosive media. The pump rotates clockwise when viewed from the driving end.
Product Features
SLZA series is a radial split pump shell, in which SLZA is API610 standard OH1 pump, SLZAE and SLZAF are API610 standard OH3 pump. The degree of generalization is high, and the hydraulic components and bearing components are consistent; Series pumps can be equipped with thermal insulation jacket structure; High pump efficiency; The corrosion allowance of pump body and impeller is large; The shaft is sealed and protected by the shaft sleeve, which is completely separated from the medium, avoiding the corrosion of the shaft and improving the overall life of the pump; The electric motor adopts extended diaphragm coupling, which is very convenient and fast without disassembling the pipeline and motor during maintenance.
Performance Range
1. Bore: DN25~400mm
2. Flow range Q: To 2600m³/h
3. Head range H: To 300m
4. Working pressure P can reach 7.5MPa.(Related to materials and working temperature.)
5. Working temperature T: -80℃ ~+450℃
Working Conditions
Main Application
Convey clean and slightly polluted, low temperature and high temperature, chemically neutral and corrosive media.
Mainly used:
Oil refinery, petrochemical industry, coal processing industry and cryogenic engineering.
Chemical industry, papermaking, pulp industry, sugar industry and other ordinary process industries.
Desalinator.
Power station Auxiliary system.
Environmental protection engineering.
Ship and marine engineering.
Structural Installation Instructions
1. The pump body is supported by the foot and the impeller is closed, which can transport the medium containing a small amount of solid particles.
SLZAO is an open impeller, which can transport media containing a large number of solid particles.
2. Bearing is cylindrical roller bearing+angular contact bearing to balance axial force and radial force, reducing bearing heating.
3. The back door design is adopted to cooperate with the extended diaphragm coupling, so it is not necessary to move the motor and remove the inlet and outlet pipelines when replacing the wearing parts such as the mechanical seal.
4. Wear rings are arranged at the front and rear of the impeller and the pump cover of the pump body.
5. The mechanical seal chamber is designed according to API682 standard, and all sealing schemes can be configured.