Axial/Mixed Flow Pump

Product Category

Axial/mixed-flow submersible pump

Product Code

QZ (H)

Product Overview

QZ submersible axial-flow pump and QH submersible mixed-flow pump of Shanghai Liancheng (Group) Co., Ltd. are a new generation of axial-flow pumps and mixed-flow pumps based on digesting and absorbing the advanced technology of similar products at home and abroad, combined with our company's many years of design experience, which are specially designed for large flow and low lift occasions. The hydraulic models have reached the leading level in China. Compared with the old models, the flow rate is increased by 20%-30%, the efficiency is increased by 3%-5%, and the cavitation resistance is excellent. The lift of QZ submersible axial-flow pump is generally less than 10m, and that of QH submersible mixed-flow pump is generally less than 20m. This product is the best replacement of traditional axial flow pump and mixed flow pump.

SONY DSC
SONY DSC
SONY DSC

Product Features

1. The machine and pump are integrated, with compact structure and strong reliability.
2. Double or triple mechanical seal leak-proof device.
3. The whole pump dives into the water, and the cooling condition is good.
4. F-class insulation and IP68 protection level multiple monitoring alarm protection device.
5. Shaft installation, easy to maintain.
6. Greatly simplify the civil engineering and building structure engineering of the pumping station, and save 30%-40% of the total cost of the pumping station engineering.
7. Simple maintenance, leakage and internal winding temperature rise protection device, can be equipped with control cabinet, reliable operation.
8. Low noise and long service life.

Performance Range

1. Flow range: 0-25 m³/h
2. Head range: 0-30 m
3. Power: 18.5-7000KW
4. Voltage: ≤355KW, Voltage 380V or 660V;≥355KW, Voltage380v, 660v, 6Kv,  10Kv
5. Frequency: 50Hz;
6. Cable length: 10m;
7. Insulation grade: F

SONY DSC
/axialmixed-flow-pump/
SONY DSC

Working Conditions

Clear water not exceeding 50℃ and other liquids similar to clear water or mild sewage.

Main Application

QZ series submersible axial-flow pumps and QH series submersible mixed-flow pumps are widely used in industrial and agricultural water transportation, urban water supply, light sewage discharge and water transfer projects.

Structural Installation Instructions

1. Installation mode of water inlet and outlet channels:
A: Inlet channel: according to the recommended form of the sample outline installation drawing, the minimum submerged depth of the pump in liquid is greater than the value in the drawing.
B: Water outlet mode: tapping the door or other modes.
C: Installation mode: Variable-tube suspension, water suspension on the shaft, water suspension under the shaft, proficient in floor-type water suspension, floor-type water suspension under the shaft, and precast concrete shaft type.
2. Waterproof motor; Protection grade of IP68 and cooling mode of ICWO8A41.
3. There are two or three mechanical seals.
4. QZ and QH series are equipped with leakage protection sensors: when water leaks in the oil chamber, motor chamber or junction box, the sensors will give an alarm or stop, and keep the fault signal.
5. The submersible motor winding is equipped with an overheat protector, which signals or stops when the temperature exceeds the specified value.
6. Seen from above the motor, the impeller rotates clockwise.